This page was exported from Up-To-Date And Reliable MCPD Exam Questions For 100 Percent Pass [ ]
Export date: Tue Oct 22 13:48:32 2019 / +0000 GMT

[19/June/2018 Updated] 362q 2V0-602 Exam Dumps Offered By PassLeader Help Passing Exam Easily

New Updated 2V0-602 Exam Questions from PassLeader 2V0-602 PDF dumps! Welcome to download the newest PassLeader 2V0-602 VCE dumps: (362 Q&As)

Keywords: 2V0-602 exam dumps, 2V0-602 exam questions, 2V0-602 VCE dumps, 2V0-602 PDF dumps, 2V0-602 practice tests, 2V0-602 study guide, 2V0-602 braindumps, VMware vSphere 6.5 Foundations Exam

P.S. New 2V0-602 dumps PDF:

New 2V0-620 dumps PDF:

When viewing the Advanced Performance Charts in the vSphere Web Client, what two options determine the amount of historical data available in the chart? (Choose two.)

A.    Inventory object
B.    Statistical level
C.    Number of metric groups
D.    Collection interval

Answer: BD

What is the VDP appliance available storage configuration maximum?

A.    62 TB
B.    2 TB
C.    4 TB
D.    8 TB

Answer: D

What are three prerequisites for enabling UEFI secure boot? (Choose three.)

A.    Operating system that supports UEFI secure boot
B.    VM has a VMXNET 3 network adapter
C.    VM is places on a VMFS6 datastore
D.    Virtual hardware version 13 or later
E.    EFI firmware

Answer: ADE

A vSphere administrator wants to force the issue of encrypted vMotion for encrypted virtual machines. What steps must be performed?

A.    right-click the datastore
select edit settings
select encryption
select Required from the Encrypted vMotion drop-down menu
B.    right-click the VM
select edit settings
select VM Options
select encryption
select Required from the Encrypted vMotion drop-down menu
C.    right-click the datacenter
select edit settings
select encryption
select Opportunistic from the Encrypted vMotion drop-down menu
D.    right-click the cluster
select edit settings
select encryption
select Disabled from the Encrypted vMotion drop-down menu

Answer: B

Which two options are valid to create vApp in the vSphere Environment? (Choose two.)

A.    Login using vSphere WebClient to the vCenter Server, right click on the standalone ESXi host and select Create new vApp.
B.    Login using vSphere Host Client to the ESXi host, right click on the host and select Create new vApp.
C.    Login using vSphere C# Client to the ESXi host, right click on the host and select Create new vApp.
D.    Login using vSphere WebClient to the vCenter Server, right click on the Cluster and select Create new vApp.

Answer: BD

What three types of host bus adapters are supported for connecting to shared storage on an ESXi hosts? (Choose three.)

A.    Software SATA
B.    Software iSCSI
C.    Hardware HBA
D.    Software FCoE

Answer: BCD

Which three IP address may be pinged by the Test Management network feature in the ESXi hosts DCUI? (Choose three.)

A.    Secondary DNS server
B.    Default gateway
C.    NTP server
D.    Primary DNS server
E.    DHCP server

Answer: ABD
To test if the ESXi host management network, press Enter. ESXi performs the following tests:
– pings the subnet gateway specified
– pings the primary DNS server specified
– pings the alternate DNS server specified
– resolves the hostname of the ESXi host

The error message below displays in the Summary tab for a host, even though there are two available uplinks for the vSwitch hosting the VMkernel Port Management Network, providing redundancy:
Host <xxx> currently has no management network redundancy
Which three methods can be used after confirming the correct network configuration? (Choose three.)

A.    Set the vSphere HA advanced option das.ignoreRedundantNetWarning to true and reconfigure VMware HA on that host.
B.    Disable and then re-enable HA.
C.    Restart the management agents from the DCUI.
D.    Add a third vmnic to the management network on a vSwitch configured with NIC teaming.
E.    Right-click the host and click Reconfigure HA.

Answer: ABE

By using vSphere Standard Switch, what is the maximum number of port groups allowed per host?

A.    1000
B.    2000
C.    1024
D.    900
E.    512

Answer: E

A VMware vSphere Administrator is tasked with enabling Fault Tolerance (FT) on a VM but is unable to. What is the reason that FT cannot be enabled?

A.    The VM has a VMDK that is greater than 2 TB.
B.    The VM is configured to use Jumbo Frames.
C.    The VM has 4 vCPU.
D.    The VM is running an operating system that is more than 4 years old.

Answer: C
Enabling fault tolerance on a virtual machine with more that 1 vCPU using the vSphere Client fails. You see the error:
“The Virtual Machine has x virtual CPUs and is not supported for Fault Tolerance”

What ESXi command line command can be used to troubleshoot basic network connectivity?

A.    vmkping
B.    vim-cmd
C.    vmware-lv
D.    chconfig

Answer: A

What load balancing appliance does VMware recommended for deploying a vRealize Log Insight cluster?

A.    VMware NSX Load Balancer
B.    integrated Load Balancer
C.    F5 Big-IP
D.    Citrix NetScaler

Answer: B
You can enable the vRealize Log Insight integrated load balancer (ILB) on a vRealize Log Insight cluster to ensure that incoming ingestion traffic is accepted by vRealize Log Insight even if some vRealize Log Insight nodes become unavailable. You can also configure multiple virtual IP addresses. It is highly recommended that you enable the ILB in a vRealize Log Insight cluster environment.

A vSphere Administrator is tasked with implementing a production VMware vSAN cluster and has followed the design and sizing guide to correctly size the environment. Which two requirements represent valid VMware recommendations? (Choose two.)

A.    A disk group must be composed of more than one cache disk and at least one capacity disk.
B.    All-Flash configurations do not require a caching tier.
C.    A disk group must be composed of one cache disc and at least one capacity disk.
D.    The cache tier should be sized to no less than 10% of the capacity tier.

Answer: CD

A vSphere Administrator currently has three two-socket servers that meet the requirements for VMware vSAN. Curently there is VMware Essentials Plus licensing for all servers. Implement a solution based on VMware vSAN?

A.    Upgrade to VMware vSphere Standard.
B.    Upgrade to VMware vSphere Enterprise Plus.
C.    None is required. VMware vSAN is built into the Kernel.
D.    Upgrade to VMware vSAN Standard.

Answer: C

Which statement is true when adding a VM to a Resource Pool?

A.    The VM share value (%Shares) adjusts to the Resource Pool.
B.    The VM reservation changes.
C.    The VM limit changes.
D.    The VM share value (%Shares) remains unchanged.

Answer: A

What three configuration steps are required to mount an NFS datastore in vSphere? (Choose three.)

A.    On each ESXi host, configure a VMkernel Network port for NFS traffic.
B.    On the NFS server, configure an NFS volume and export it to be mounted on the ESXi hosts.
C.    Configure VMkernel Port Binding.
D.    On virtual machines running Microsoft Windows, increase the value of the SCSI TimeoutValue parameter to allow Windows to better tolerate delayed I/O resulting from path failover.
E.    If you plan to use Kerberos authentication with the NFS 4.1 datastore, configure the ESXI hosts for Kerberos authentication.

Answer: ABE


Download the newest PassLeader 2V0-602 dumps from now! 100% Pass Guarantee!

2V0-602 PDF dumps & 2V0-602 VCE dumps: (362 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)

P.S. New 2V0-602 dumps PDF:

New 2V0-620 dumps PDF:



Post date: 2018-06-19 08:28:40
Post date GMT: 2018-06-19 08:28:40
Post modified date: 2018-06-19 08:28:40
Post modified date GMT: 2018-06-19 08:28:40

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team